Turkish Steel Exports to Africa: A Practical Export Guide
A practical guide to Turkish steel exports to Africa: which markets buy, the documents a shipment needs, how landed cost is built and how buyers...
· · 12 min read
Written by Burak Unal, Director of African Markets

Turkish medical supplies for Africa cover far more ground than most first time buyers expect, and this guide sets out what Turkey actually manufactures, which approvals must exist before a container is booked, and how to check a supplier before any money moves. By the end you should be able to brief a Turkish factory properly, and to tell a manufacturer apart from a trading desk and a broker.
Most of the people who ask us about this are hospital groups, pharmacy chains, distributors and tender agents holding a quotation from Istanbul or Izmir and wondering what to ask next. A few are Turkish producers who cannot work out why an African order stalls on paperwork rather than on price.
One thing first: we advise, and we do not register products or clear goods. Whether a device or a medicine may be sold in a country is decided by that country's authorities. What we can set out is the order those decisions arrive in, because in medical trade the order is most of the problem.
Turkey competes on three things at once: a domestic manufacturing base in consumables and generic medicines, sea and air routes to North and East Africa that are shorter than the equivalent run from Asia, and factories willing to produce small private label batches. None is unique on its own; the combination is what brings a buyer to Istanbul rather than a larger exporter further east. Transit times and freight rates move, so take both from a forwarder's current quotation.
Demand on the African side is documented, not assumed. As of 2017, the last year covered by our own Africa Economic Report published in 2019, medicaments ranked among the top three import products in six of the twenty markets we cover: Algeria, Tanzania, the Democratic Republic of Congo, Uganda, Zimbabwe and Ethiopia. That ranking is nine years old, so confirm the current position with the destination country's customs or statistics office before you build a plan on it.
The same report shows how thin Turkey's share of that demand was. Medicines and devices sit inside the wider chemicals and pharmaceuticals sector, and the shares below are a share of Turkey's total exports to each country, not of that country's imports.
| Market | Turkey's total exports, 2017 (USD million) | Packaged medicaments share of that total, 2017 |
|---|---|---|
| Kenya | 187 | 1.5 percent |
| Ethiopia | 338 | 1.4 percent |
| Libya | 879 | 2.3 percent |
Source: Istanbul Africa Trade Company, Africa Economic Report, published 2019, figures as of 2017. A one or two percent share means the route existed and was still thin, which is usually where a prepared distributor has room.
Turkey's strongest categories are single use consumables, wound care, hospital furniture, dental and laboratory items, and packaged generic medicines. High end imaging and implantable devices are largely imported into Turkey rather than made there, so a quotation covering them deserves a question about who actually makes them.
Contract manufacturing matters more in this sector than in most. A distributor with a brand and a tender history can have dressings, consumables or a small generic range made to its own specification and label, which is our contract manufacturing service. It also changes the regulatory picture: a brand owner carries obligations a pure reseller does not.
A medical import needs two separate sets of approvals, and both belong in hand before a shipment is booked. The product must be lawfully on the market in Turkey, and it must also be registered or authorised by the medicines and medical devices regulator in the destination country. Neither substitutes for the other. A Turkish certificate is not an African registration, and buyers lose months assuming it is.
On the Turkish side a device is normally covered by a declaration of conformity and a CE mark, with the manufacturer and the product recorded in the product tracking system run by Turkey's Medicines and Medical Devices Agency, TİTCK. A medicine carries a marketing authorisation, and the plant that makes it carries a good manufacturing practice certificate. Ask for the certificate numbers and verify them with the body that issued them, not with the supplier who sent them.
On the African side, medicine registration in Africa is handled country by country by the national medicines regulatory authority, and the dossier, the fees and the timeline differ in every market. In our experience the registration dossier, not the price, is what decides whether a medical order ships this quarter or next year.
The African Union's African Medicines Agency and the regional economic communities are working towards shared assessment. At the time of writing a product still has to be registered in each market where it is sold, so check the current rule with the authority itself.
The licence or permit the buyer needs in its own country follows the pattern of any other regulated import, which we set out step by step in our guide to the import licence process for African buyers. Medical goods normally add a health regulator's clearance on top of the ordinary customs file, so the two timelines have to run in parallel.
Verify three things separately: the legal company, the factory, and the certificate for the exact model or stock code written on the invoice. A supplier can be a real company at a real address, reselling goods it holds no certificate for, and only all three checks together show you that.
We have seen an order lose a full quarter because a conformity certificate named a product family while the invoice named a model added to that range afterwards. Nothing about it was dishonest, and the goods still could not be registered. Matching the model number on the invoice to the one on the certificate is a ten minute job, and the most useful thing a buyer can do before paying a deposit.
That is what our sector and product investigation service does: finding producers, confirming that they are producers, and reporting on products and prices. We report what we find; whether to buy stays your decision.
A medical shipment carries the ordinary export file plus a regulatory file, and it is the second one that holds consignments at the port. The ordinary file is the commercial invoice, the packing list, the bill of lading or air waybill, and the certificate of origin, which a Turkish chamber of commerce issues and no consultancy can issue for you.
The regulatory file usually holds some combination of the documents below. The destination regulator decides which it wants, so confirm the list in writing before production starts:
Remaining shelf life is the detail that catches new buyers. Many African regulators set a minimum remaining shelf life measured on arrival rather than on dispatch. Each authority sets its own figure, so the batch has to be allocated against it rather than against the production date. Our wider guide to exporting medical supplies to Africa looks at the same consignment from the Turkish exporter's side.
Keep a first order small, keep it to one product category, and do not place it until the registration covering that category is granted. The temptation is a mixed container, because the per unit freight looks better on paper. It also multiplies the number of certificates that can fail.
A workable sequence looks like this:
Payment terms are between you and your bank. We do not finance trade and we do not hold funds.
In our experience, pharmaceutical imports from Turkey reward that kind of patience more than most trades, because the cost of a rejected consignment of medicines is never only the freight. Devices are more forgiving of a small mistake, which is why hospital equipment suppliers in Turkey are often a better first relationship than a medicines producer for a distributor new to the route.
Turkish medical supplies for Africa are a real and under-used route, and almost everything that decides whether it pays is settled before the order: the product category, the registration, a certificate that matches the model, and a supplier you have verified rather than trusted. Get those four right and the shipment itself becomes ordinary. Treat medicine registration in Africa as the first step rather than the last, and pharmaceutical imports from Turkey as a programme to build rather than a single purchase to place.
Istanbul Africa Trade Company is a trade consultancy based in Istanbul that has helped businesses in Turkey and across Africa find suppliers, verify partners and build trade routes since 2018. We advise on import and export consulting, sector and product investigation, contract manufacturing, and trade strategy development. To talk through your own plans, call or message us on WhatsApp at +90 532 669 30 50, email contact@istanbulafrica.com, or visit us at Merkez Mahallesi Hasat Sokak No:12a, 34384 Şişli/İstanbul. Contact us for guidance on your next shipment or sourcing decision.
No, and no consultancy can. The application is filed by the applicant, usually the manufacturer or a locally established agent, and the decision belongs to the regulator. We can explain what an authority asks for and help you review the file, but we issue nothing.
Many are, but certification belongs to a product and not to a company, so check it per model. Ask for the declaration of conformity and the CE certificate with the model number on them, then verify it with the notified body that issued it.
There is no single answer, because every market runs its own process, dossier and queue. Ask your national medicines regulatory authority for its current published timeline, and plan the commercial side around that rather than a supplier's estimate.
One product category, in a quantity you can sell within about a quarter, placed only after the registration for that category is granted. Consumables or dressings are a common start, because the regulatory load is lighter than for finished dose medicines.
In most markets the registration has to sit with a locally established entity, a local agent or a subsidiary, so confirm your own authority's rule before you negotiate. Establish whose name any existing registration is held in, since that decides who controls the product in your market.
Istanbul Africa Trade Company is a trade consultancy based in Sisli, Istanbul, founded in 2018. We work with importers, exporters, manufacturers and distributors in Turkey and across 20 African markets, with market leaders on the ground in Ghana, Uganda and Zimbabwe. Our services cover import and export consulting, sector and product investigation, contract manufacturing, and trade strategy development. You can browse our African country profiles and sector guides on our site, or reach our advisors at contact@istanbulafrica.com and +90 532 669 30 50.
Istanbul Africa Trade Company provides trade consulting services only. We are not a freight forwarder, a customs broker, a shipping line, a bank, a law firm, a government agency or a certification body. We do not move cargo, clear goods, finance trade, or issue permits, licences or certificates. Tariff, customs, certification and regulatory decisions belong to the authorities of the countries involved. This article is general information, current as of the time it was written. Rules, tariffs and costs change, so confirm the details for your own case with the relevant authority or with our advisors before you act on them.
A practical guide to Turkish steel exports to Africa: which markets buy, the documents a shipment needs, how landed cost is built and how buyers...
A practical guide to Turkish chemical exports to Africa: the products that sell, the documents and registration a shipment needs, and the markets...
A buyer's guide to Turkish machinery exports to Africa: what African manufacturers buy, which markets lead, the documents a shipment needs, and how...